Pulse FC Mode
3A6673B
31
3.
The k-factor adjustment screen shown in
F
4.
Use the UP and DOWN ARROW to
increase or decrease the displayed
k-factor until the new k-factor displays on
the screen.
NOTE:
Selecting the GO BACK Function
on this screen returns the display to the
previous screen (shown in F
5.
After adjustments to the k-factor are
complete, ENTER should be highlighted
in the lower left corner of the display as
shown in F
. 65. Press the center
ENTER button on the keypad to select
ENTER and save the new calibration
factor.
After selecting ENTER the Main Menu screen
shown in F
. 66 displays.
DISPENSE
Screen Identification
A
BANNER -
Name of the fluid assigned to the
meter in Pulse FC. This can only be set up
by a Pulse FC profile tag.
B
BATTERY INDICATOR -
When the batter-
ies are fully charged, the battery is com-
pletely filled in. As the battery discharges,
the amount of battery that is filled-in
declines.
C
FUNCTION COMMAND -
Function com-
mand options appear at the bottom of the
display when applicable to the task being
performed. END is the only Dispense screen
option.
F
IG
. 64
F
IG
. 65
F
IG
. 66
F
IG
. 67
A
B
C
D
E
F
G
