Storage
3A9002A
27
Storage
With proper storage, the FieldLazer will be
ready to use the next time it is needed.
Always circulate Pump Armor storage fluid
through system after cleaning. Water left in
sprayer will corrode and damage pump.
Follow
, page 23, and
•
Before storing FieldLazer make sure all
water is drained out of sprayer and
hoses.
•
Do not allow water to freeze in
FieldLazer or hose.
•
Do not store FieldLazer under pres
-
sure.
•
Store FieldLazer indoors.
1. Perform
2. Place suction tube in Pump Armor fluid
bottle and drain tube in waste pail.
3. Place Prime/Spray valve in PRIME
position.
4. Press ON/OFF switch to
ON
position.
Button is illuminated when ON.
5. Turn pressure control knob clockwise
until the pump turns on.
6. When storage fluid comes out of drain
tube (5-10 seconds) turn ON/OFF
switch to
OFF
position.
7. Place Prime/Spray valve in SPRAY
position to keep storage fluid in
FieldLazer during storage. If Pump
Armor is run through the hose and gun,
relieve pressure by triggering the gun
prior to storage.
8. Secure a plastic bag around suction
and drain tube to catch any drips.
