Graco 25T991, Instructions - Parts Manual

Page: 9 / 52

Installation
3A8476A 9
Robot Mounting Flange
1. Attach the mounting flange onto the sixth axis of the
robot with the required bolts supplied with the SST
Switch 3D Gun mounting kit.
2. The mounting flange is then attached to the body of
the SST Switch 3D Gun with three M6x20 hex
socket screws. Torque to 98.2 in-lbs (11.1 N•m). It is
important to make sure the 6mm guide pins
supplied with the kit are inserted into the correct
positions. See F
IG
. 2.
Anti-Rotation Brackets
After the SST Switch 3D Gun is mounted to the robot,
the anti-rotation brackets must be attached to the swivel
housing (511) and to the fixation point on the robot using
the hex head screws. Exact fitting of the anti-rotation
brackets will depend on the robot and kit being used.
See F
IG
. 3 for installation example and page 32 for
swivel housing part reference.
Nozzles
NOTE: Nozzles are not supplied with the SST Switch
3D Gun and must be purchased separately to match
customer specifications. See
LASD Nozzle Kit
Assembly page No. 35, or Spray Stream Nozzle Kits
and Spray Stream Adapter Kit, 25U338 page No. 36
for nozzle type and size options.
LASD Nozzle Style Attachment
NOTE: See LASD Nozzle Assembly Kits 25U016 and
25U017 for constructing an LASD nozzle assembly.
1. Insert O-ring (707) into the 3 head adapter
assembly (105).
2. Place small end of nut (706) against the 3 head
adapter assembly (105) but do not tighten thread.
3. Align the pins of the nozzle assembly (705) and
insert into the 3 head adapter assembly (105).
Torque the nut (706) to 15 ft-lb (20.34 N•m) See
F
IG
. 4.
Spray Stream Nozzle Style Assembly.
1. Place the O-rings (707) into the 3 head adapter
assembly (105).
2. Place an O-ring into each spray nozzle sealer
adapter (902). The nozzles (801) are then inserted
in the spray nozzle sealer adapter (902) making
sure the nozzle is keyed into the spray nozzle sealer
adapter.
3. Line up the dowel pins of the spray nozzle sealer
adapter (902) with the 3 head adapter assembly
(105), and secure together with the retaining nut
(901) Torque to 15 ft-lb (20.34 N•m). See F
IG
. 5.
F
IG
. 2
F
IG
. 3
6mm guide
pins
M6 x 20 hex
socket screws
Anti-Rotation
Brackets
511
F
IG
. 4
105
707
705
706