Setup
3A5581C
13
Cut Depth Button
Quick Press:
Takes the cutter head to the Cut Depth Tar-
get.
Long Press:
-
If at or above zero point: Opens new screen to
select desired cut depth using up/down buttons.
•To exit without saving, quick press the Cut Depth
Button.
•To exit with saving, long press the Cut Depth But-
ton.
-
If below zero point: Reprograms the Cut Depth Tar-
get to the current cutter head position.
Up Arrow Button*
Quick Press:
Raises the cutter head by 0.01” (0.25mm,
10 mil).
Long Press:
Raises the cutter head to Home position.
Down Arrow Button*
Quick Press:
Lowers the cutter head by 0.01” (25mm, 10
mil).
Long Press:
Lowers the cutter head to Cut Depth Target.
*
Handlebar Rocker Switch has the same functions as Up
and Down Arrow Buttons.