![background image](http://html1.mh-extra.com/html/graco/25d117/25d117_operation_2251461039.webp)
Repair
3A5354B
39
Replace Display
NOTE:
Order Kit 24E451 for replacement. Software
token 16C027 is required to install software before use.
1. Disconnect power.
2. Pull the display out of the bracket clips to remove it.
3. Disconnect the CAN cable(s) from the display.
4. Replace with the new display. Reconnect the CAN
cable(s).
5. Load the correct display software for the system.
Follow the steps in the
section on page 38.
NOTE:
The token is not included with the display and
must be ordered separately.
NOTICE
To avoid damaging the circuit board, wear a ground-
ing strap.