![background image](http://html1.mh-extra.com/html/graco/24z660/24z660_instructions-manual_2251638043.webp)
Manifold
3A5082G
43
Manifold Dimensions
6 Point Manifold Dimensions
12 Point Manifold Dimensions
Injector Manifold Assembly
Injector outputs can be combined for a common bearing
point with a large grease requirement but the output for
a single injector cannot be split into multiple bearing
points.
1.
Install the manifold stem (121) and o-ring (124) in
the inlet port of the injector manifold (119 or 120)
(F
NOTE:
The inlet port on the 12 point manifold (120)
can be installed in the side or top inlet port.
2.
Use plugs (126), to block any ports not used in the
injector manifold (F
sure o-ring is installed on the plug. If additional lube
points are needed these plugs can be removed and
replaced with appropriate sized injectors and lube
lines.
F
IG
. 34
F
IG
. 35