Installation
3A2592M
11
Size 10Ceiling Mounting Without an I-Beam - Open Channel
For Size 10 Models order kit: 24A934, 24A935, 24A936, 24A937, 24A938, 24A939
For Size 5 Models order kit: 24N674, 24N675
For Size 5 Models mounted in an Size 10 Model Mounting Channel: Size 5 models require a specific hold down
plate designed for Size 5 Cord Reels. Contact Graco Customer Service for assistance when ordering these parts.
NOTE:
See page 16 for Open Channel dimensions.
1. Ceiling Mount Only: Position cord reel so the reel
base is facing up. Check pawl to make sure it is not
wedged (F
. 4, 9). (Also see General Installation
Information page 8.)
2. Use the base channel (F
. 6 - 103) to lay out the
position of the mounting holes before you drill.
3. Drill mounting holes.
4. Install the base channel (103) and base plate (105)
as shown in F
5. Slide cord reel into the reel base (105) and install
the hold down plate (104), washer (102) and screw
(101). Tighten the screw firmly (F
. 6).
Be sure it is
secure before lowering the lift truck.
6. Continue installation following steps 6 - 8 of
Wall/Ceiling Mounting with Plate instructions,
page 9.
Ceiling Mounting Directly to an I-Beam
1. Check pawl to make sure it is not wedged (F
. 4,
9). (Also see General Installation Information page
8.)
2. Use the mounting template (F
. 7 - B) to lay out the
position of the mounting holes before you drill
NOTE:
Templates to scale are provided starting on
page 28.
3. Drill mounting holes in the I-Beam (C) (F
. 7).
4. Bolt reel to I-Beam.
Be sure it is secure before
lowering the lift truck.
5. Continue installation following steps 6 - 8 of
Wall/Ceiling Mounting with Plate instructions, page
Open Channel Mounting Kits
Size 5 Models
Size 10 Models
FN Description
24N674
1 Reels
24N675
2Reels
24A934
1 Reel
24A935
2 Reels
24A936
3 Reels
24A937
4 Reels
24A938
5 Reels
24A939
6 Reels
101 SCREW, 3/8” - 16 x
5/8”
5
10
5
10
15
20
25
30
102 WASHER, lock, 3/8”
5
10
5
10
15
20
25
30
103 BASE, reel, channel
1
1
1
1
1
1
1
1
104 PLATE, hold down
1
2
1
2
3
4
5
6
105 BASE, plate
1
2
1
2
3
4
5
6
F
IG
. 6
103
102
101
104
105
F
IG
. 7
A
B
C
Summary of Contents for 24Y858
