Mount
Mount
Mount The
The
The Pump
Pump
Pump
To avoid serious injury from toxic fluid or fumes:
• Ventilate to a remote area. The pump
exhaust air may contain contaminants. See
Air Exhaust Ventilation, page 11
• Never move or lift a pump under pressure. If dropped,
the fluid section may rupture. Always follow the
Pressure Relief Procedure, page 14
, before moving
or lifting the pump.
• Prolonged exposure to UV radiation will degrade
natural polypropylene components of the pumps. To
prevent potential injury or equipment damage, do
not expose pump or the plastic components to direct
sunlight for prolonged periods.
1.
Be sure the mounting surface can support the
weight of the pump, hoses, and accessories, as
well as the stress caused during operation.
2.
For all mountings, be sure the pump is secured
with screws through the mounting feet. Always
mount the pump upright.
3.
Make sure the surface is flat and that the pump
doesn’t wobble.
4.
For ease of operation and service, mount the
pump so air valve, air inlet, fluid inlet and fluid
outlet ports are easily accessible.
Accessories/Components
Accessories/Components
Accessories/Components Not
Not
Not Supplied
Supplied
Supplied
System
System
System Components
Components
Components
A
Air supply line
J
Air inlet port (not visible)
B
Bleed-type master air valve (required for
your pump)
K
Exhaust port and muffler
C
Air filter/regulator assembly
L
Fluid inlet port
D
Master air valve (to isolate the filter/regulator
for service)
M
Fluid outlet port
E
Grounded flexible fluid supply line
N
Mounting feet
F
Fluid drain valve (required for your pump)
G
Fluid shutoff valve
H
Grounded, flexible fluid outlet line
334796G
9
Tel: 866-777-6060
Fax: 866-777-6383
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910
