Graco 24V641, Instructions Manual

Page: 4 / 68

4 M0312
EN
C.1
WARNINGS
The following warnings are for the setup, use, grounding, and repair of this equip-
ment. The exclamation point symbol alerts you to a general warning and the hazard
symbols refer to procedure-specific risks. When these symbols appear in the body
of this manual or on warning labels, refer back to these Warnings. Product-specifi
hazard symbols and warnings not covered in this section may apear thoughout the
body of this manual where applicable.
WARNING
FIRE AND
EXPLOSION
When flammable fluids are
present in the work area,
such as gasoline and wind-
shield wiper flui , be aware
that flammable fumes can
ignite or explode. To help
prevent fi e and explosion:
Use equipment only in will ventilated area.
Eliminate all ignition sources, such as cigarettes
and portable electric lamps.
Keep work area free of debris, including rags
and spilled or open containers of solvent and
gasoline.
Do not plug or unplug power cords or turn
lights on or off when flammable fumes are
present.
Ground all equipment in the work area.
Stop operation immediately if static spark-
ing occurs or if you feel a shock. Do not use
equipment until you identify and correct the
problem.
Keep a working fi e extinguisher in the work
area.
ELECTRIC
SHOCK
F
Electrocution or death This equipment must be grounded. Improper
grounding, setup or usage of the system can
cause electric shock.
Turn off and disconnect power cord before ser-
vicing equipment.
Connect only to a grounded electrical outlets.
Use only 3 wire extension cords in accordance
with local electrical codes. Extension cords
should have a ground lead.
Ensure ground prongs are intact on power and
extension cords.
Do not expose to rain. Store indoors.
Never touch the electric plug of socket with
wet hands.
Do not turn the dispensing system on if the
power connection cord or other important
parts of the apparatus are damaged, such as
the inlet outlet plumbing, dispensing nozzle or
safety devices. Replace damaged components
before operation.
Before each use check that the power connec-
tion cord and power plug are not damaged. If
damaged, have power connection cord replaced
before use by a qualified ele trician.
The electrical connection between the plug and
socket must be kept well away from water.
Unsuitable extension leads can be hazardous,
in accordance with current regulations. only ex-
tension cords that are labelled for outdoor use
and have a suffici t conduction path should
be used outdoors.
For safety reasons, we recommend that, in prin-
ciple, the equipment be used only with a earth-
leakage circuit breaker (max 30 mA).
Electrical connections must use ground fault
circuit interrupter (GFCI).