2
3A1307A
Winch Kit Installation
1.
Assemble adaptor bracket (1) to height adjustment
bracket on both sides. Fasten with bolts (6), wash-
ers (7), and nuts (8). Torque to 28 ft-lb.
2.
Use four bolts and lock washers (supplied) to
assemble winch (5) onto winch arm (2).
3.
Use bolts, washers, and nuts (supplied) to assemble
cable guide onto winch arm bracket (3).
4.
Slide winch arm bracket (3) into winch arm (2) and
secure into place by tightening extension clamp (15)
and inserting the safety pin.
5.
Insert winch assembly into one of the adapter brack-
ets (1) and secure with pin (9).
6.
Install winch switch (20) and connector bracket (17)
next to the battery on the RoadPak frame. Fasten
with screws (16).
7.
Pull the wires of the winch control connector (19)
through the hole of the connector bracket and fasten
the connector to the bracket with screws (18).
ti17104a
8
7
7
6
1
ti17105a
5
2
ti17107a
3
ti17106a
3
2
15
ti17108a
1
9
ti17109a
20
17
16
ti17110a
19
18
