Graco 24F301, Instructions - Parts

Page: 3 / 4

24G611 Stand Kit, for Meter-Based Systems
3A1325C 3
24G611 Stand Kit, for Meter-Based Systems
24G611 Kit Parts
NOTE: Stand parts are not sold separately.
Install the Cart
1. See F
IG
. 2. Assemble the two sides of the cart as
shown. The swivel casters with brake (804) must be
installed at the rear of the cart.
2. Install the meter stand adapter (812) on the two
sides of the cart and secure with the screws (808),
washers (807), lockwashers (806), and nuts (805).
3. Install the cart onto the ProMix 2KE frame (F) with
the tabs (T) on the outside of the frame posts.
Secure with the screws (808), washers (807), lock-
washers (806), and nuts (805).
Dimensions
Ref. Description Qty.
801 TUBE, cart 2
802 PLUG, tube 4
803 CASTER, cart 2
804 CASTER, swivel, with brake 2
805 NUT, hex 8
806 WASHER, lock 8
807 WASHER 16
808 SCREW, cap, hex hd‘ 8
809 PLUG, button 4
810 NUT 4
811 WASHER 4
812 ADAPTER, meter stand 1
TI16570a
Ref. in. (mm)
A 70.42 (1789)
C 21.75 (553)
D 27.00 (686)
A
C
D
F
IG
. 2. 24G611 Stand Kit, for Meter-Based Systems
NOTICE
The kit is not designed to be shipped when assembled
to a system. Damage will occur.
TI16569a
807
807 808
801
802
804
803
809
810
811
806
805
F
T
812
808
807
807
806
805