Flush Pump Before Installing Kit
2
309911B
Flush Pump Before
Installing Kit
. 1. Flush component A (ISO) side from pump A
inlet (C) to PRESSURE RELIEF/SPRAY valve (SA) on
Reactor fluid manifold. See Reactor operation manual
for details.
Tools Required
•
12 in. adjustable wrench
•
1/4 in. open end wrench
•
7/16 in. open end wrench
•
13/16 in. open end wrench
•
7/8 in. open end wrench
•
non-sparking hammer
•
channel locks
•
dropcloth and rags
•
vise with soft jaws
•
thread sealant
WARNING
Read warnings in Reactor operation manual. Flush
equipment only in a well-ventilated area. Do not spray
flammable fluids. Do not turn on heaters while flushing
with flammable solvents.
F
IG
. 1
TI2602a
C
SA
