Setup
10
309907P
Preparing the Spray Surface
To get proper adhesion, ensure surface is completely
clean.
1
Turn turbine On a few minutes before spraying to
allow warm-up.
Note:
When turbine is not in use for an extended period
of time, turn it off. The turbine does not shut off automat-
ically.
2
Ensure turbine filter is clean before operating. Clean
filter, page 11.
Note:
To adjust spray gun pattern, see HVLP-Turbine
Gun manual 309205 (310750 Korean).
WARNING
Page 3
Sparks can be expected during normal operation
of turbine motor. These sparks can ignite fumes
from flammable liquids, dust particles, and other
flammable substances in the spray area.
•
Use additional hose if necessary, and ensure
the turbine is operated in clean, dry, well ven-
tilated area.
•
Never use turbine inside spray booth!
