Component Identification
10
309524V
Mounting Heater
Heater controls must be easily accessible.
The mounting surface must be able to support the
weight of the heater and fluid, and any stress caused
during operation.
Wall Mounting
Need wall bracket 192585 or 183982. See
, page 27. Use wall bracket as a template to mark
bolt holes.
Bracket 192585
Bracket depth provides required solid object clearance
to comply with European flame proof standards.
1.
Use M8 bolts of appropriate length and lockwasher
(CC), not supplied, to mount bracket.
2.
Install two screws (6) and washers (5) into top 2
heater mounting posts (BB) until they are about 1/8
in. (3 mm) from fully installed.
3.
Lift heater and slide two screw heads into bracket
slots. Install remaining 2 screws and tighten all 4.
Bracket 183982
1.
Mount bracket (MM) to heater with screws (6) and
lockwashers (5) supplied.
2.
Use M8 bolts of the appropriate length and lock-
washer (NN), not supplied, to secure the bracket to
the wall.
F
IG
. 3: Bracket 192585
F
IG
. 4: Bracket 183982
05442
6 in.
152.4 mm
5 in.
127 mm
6
5
CC
BB
YY
8631A
6 in.
152.4 mm
5 in.
127 mm
6
5
NN
PP
MM