Cleaning
6
309361F
Cleaning
One Quart Pressure Cup
1.
Relieve the pressure, page 4.
2.
Push the clamp lever (3b) to the unclamped posi-
tion, against the yoke. See F
3.
Twist the lid counterclockwise to disengage it.
Remove the lid.
4.
Clean the lid and the cup, using a compatible sol-
vent.
5.
Fill the cup with clean solvent and replace the lid.
6.
Set the cup air regulator at 10 psi (.07 MPa, 0.7 bar)
and spray into a waste container until clean solvent
comes from the gun.
7.
Relieve the pressure.
8.
Remove the solvent from the cup and wipe the
equipment with a solvent dampened rag.
9.
Assemble the empty cup and set the cup air regula-
tor to 10 psi (.07 MPa, 0.7 bar). Spray the gun into a
waste container until all the solvent is purged.
10. Relieve the pressure.
Fig. 2: One Quart Pressure Cup
CAUTION
To avoid damage to the air regulator diaphragms, do
not clean the air regulators in a gun washer or use
any cleaning method which allows solvent to enter
the regulator.
CAUTION
To avoid swelling of the gasket (3g), do not soak the
gasket or expose it to solvent for a prolonged period
when cleaning the pressure cup lid.
3b
TI1637b
