Instructions – Parts List
GRACO INC.ąP.O. BOX 1441ąMINNEAPOLIS, MNą55440-1441
Copyright 1999, Graco Inc. is registered to I.S. EN ISO 9001
MEDIUM PRESSURE AIR-ASSISTED
Alpha
t
AA Spray Gun
For air–assisted spray application of paints and coatings.
1500 psi (10 MPa. 105 bar) Maximum Working Fluid Pressure
100 psi (0.7 MPa, 7 bar) Maximum Working Air Pressure
16 psi (110 kPa, 1.1 bar) Maximum Compliant Inbound Air Pressure
(241509 and 241511 HVLP Guns only)
Part No. 241508, Series A
Air-Assisted Spray Gun with Carbide Ball and Seat.
Recommended For: Pigmented, Waterborne,
and Higher Viscosity Materials.
Part No. 241510, Series A
Air-Assisted Spray Gun with Plastic Ball and Seat
Recommended For: Acid–Catalyzed Materials
and Low Viscosity Lacquers and Stains.
Part No. 241509, Series A
HVLP Spray Gun with Carbide Ball and Seat,
and Compliant Air Cap.
Recommended For: Pigmented, Waterborne,
and Higher Viscosity Materials.
Part No. 241511, Series A
HVLP Spray Gun with Plastic Ball and Seat,
and Compliant Air Cap.
Recommended For: Acid–Catalyzed Materials
and Low Viscosity Lacquers and Stains.
308993G
Important Safety Instructions
Read all warnings and insturctions in this manual.
Save these instructions.
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
9116A
Summary of Contents for 241508
Page 4: ...4 308993 Notes...
