Installing the Control Unit
18
309738L
Electrical Connections
Follow these precautions when grounding, connecting
cables, connecting to a power source or making other
electrical connections.
Grounding Control Unit
Connect a ground wire from the ground point in the Pre-
cisionFlo LT control enclosure to a true earth ground.
See F
. 7. A 10 AWG, 25 ft. (7.6 m) long ground wire
with clamp, Part No. 222011, is supplied.
The PrecisionFlo LT fluid module is grounded to the
control unit, using cables provided with the module.
WARNING
To reduce the risk of fire, explosion or electric shock:
•
The PrecisionFlo LT control unit must be electri-
cally connected to a true earth ground; the ground
in the electrical system may not be sufficient.
•
All wires used for grounding must be 18 AWG mini-
mum.
•
A qualified electrician must complete all grounding
and wiring connections.
•
Refer to your local code for the requirements for a
“true earth ground” in your area.
Read Warnings, page 6.
CAUTION
If power and grounding connections are not done prop-
erly, the equipment will be damaged and the warranty
voided.
CAUTION
To avoid control voltage differences, ensure that the
automation and PrecisionFlo LT equipment are
grounded to the same point.
F
IG
. 7
Ground Terminal
L1
L2
