background image

16

308765

Parts

Part No. 232433, Series A, 23:1 Monark, cst, without agitator, with hose and gun
Part No. 232434, Series A, 23:1 Monark, cst, without agitator, hose, and gun
Part No. 232437, Series A, 23:1 Monark, cst, with agitator, hose, and gun (shown)
Part No. 232445, Series A, 23:1 Monark, sst, without agitator, with hose and gun
Part No. 232446, Series A, 23:1 Monark, sst, without agitator, hose, and gun
Part No. 232449, Series A, 23:1 Monark, sst, with agitator, hose, and gun

NOTE: To find the part number used in your package, read down the chart to find the desired ref. no., then read left
to right to find the part number for your package.

Packages

Ref.
No.

 

Description

CST
232433,
232434

CST
232437

SST
232445,
232446

SST
232449

Qty

30

SCREW, set; 1/4–20 x 1/4 in. (6 mm)

101962

101962

101962

101962

2

31

PLUG, pipe; 3/8 npt; not shown

100040

100040

1

ELBOW, tube fitting, 90

_

; 3/8 npt(m) x 1/4 in. (6 mm) OD tube

114366

114366

1

39

PLUG, agitator; not shown

114575

114575

1

AGITATOR; see manual 306565

224571

224571

1

40

AGITATOR GROUND WIRE

Not used

240585

Not used

240585

1

41

TUBE; nylon; 1/4 in. (6 mm) OD; 10 in. (254 mm) long

Not used

Obtain 
locally

Not used

Obtain 
locally

1

42

STRAINER, fluid inlet

187190

187190

187190

187190

1

Hose and Gun Parts

Part No. 232433, Series A, 23:1 Monark, cst, without agitator, with hose and gun
Part No. 232437, Series A, 23:1 Monark, cst, with agitator, hose, and gun (shown)
Part No. 232445, Series A, 23:1 Monark, sst, without agitator, with hose and gun
Part No. 232449, Series A, 23:1 Monark, sst, with agitator, hose, and gun

NOTE: The following part numbers apply only to packages supplied with a hose and gun. Part numbers vary by
package. To find the part number used in your package, read down the chart to find the desired ref. no., then read
left to right to find the part number for your package.

Packages

Ref.
No.

 

Description

CST
232433

CST
232437

SST
232445

SST
232449

Qty

101

HOSE, fluid; nylon; cst fluid fittings;1/4 npsm (fbe); 
1/4 in. (6 mm) ID; 25 ft (7.6 m) long

H42525

H42525

1

HOSE, fluid; nylon; sst fluid fittings;1/4 npsm (fbe); 
1/4 in. (6 mm) ID; 24.6 ft (7.5 m) long

239107

239107

1

102

NIPPLE; cst; 1/4 npt x 1/4 npsm

162453

162453

1

NIPPLE; sst; 1/4 npt x 1/4 npsm

166846

166846

1

103

HOSE, whip, fluid; nylon; cst fittings; 1/4 npsm (fbe); 
3/16 in. (5 mm) ID; 23.6 in. (0.6 m) long

238708

238708

1

HOSE, whip, fluid; nylon; sst fittings; 1/4 npsm (fbe); 
3/16 in. (5 mm) ID; 23.6 in. (0.6 m) long

239069

239069

1

104

FILTER/SWIVEL, gun; includes replaceable item 105

1

105

. ELEMENT, filter; 100 mesh sst; not shown

205264

205264

205264

205264

1

106

AIRLESS SPRAY GUN, for fine finish; 
see manual 311254

XTR501

XTR501

XTR501

XTR501

1

107

FINE FINISH SPRAY TIP, silver; customer’s choice;
not shown

1

Summary of Contents for 232433





















Reviews: