Repair
16
308116V
8. Place the flats of the displacement rod (13) in a
vise. Apply sealant and screw the piston assembly
onto the displacement rod. Torque to 50-70 ft-lb
(68-95 Nm).
9. Insert the displacement rod (13) into the bottom of
the cylinder (8), being careful not to scratch the
cylinder. Push the rod straight up until it protrudes
from the packing nut (2).
10. Install the ball (4*), guide (9), o-ring (12), and ball
stop pin (6*) in the intake valve housing (15).
11. Place the intake valve assembly in the locking ring
(7). Apply thread sealant to the locking ring and
cylinder (8), and screw the ring onto the cylinder.
, page