background image

307882 3

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.

WARNING

INSTRUCTIONS

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

D

This equipment is for professional use only.

D

Read all instruction manuals, tags, and labels before you operate the equipment.

D

Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.

D

Do not alter or modify this equipment. Use only Graco parts and accessories.

D

Check equipment daily. Repair or replace worn or damaged parts immediately.

D

Do not exceed the maximum working pressure stated on the equipment or in the 

Technical Data

section for your equipment. Do not exceed the maximum working pressure of the lowest rated
component in your system.

D

Use fluids and solvents that are compatible with the equipment wetted parts. See the 

Technical

Data

 section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

D

Wear hearing protection when you operate this equipment.

D

Comply with all applicable local, state, and national fire, electrical, and safety regulations.

MOVING PARTS HAZARD

Moving parts, such as the priming piston and ram plate, can pinch or amputate your fingers.

D

Keep clear of all moving parts when you start or operate the pump.

D

Keep hands and fingers away from the priming piston during operation and whenever the pump is
charged with air.

D

Keep your hands away from the ram plate and the lip of the drum while the ram is operating.

D

Before you service the equipment, follow the

 Pressure Relief Procedure

 on page 7 to prevent

the equipment from starting unexpectedly.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin,
inhaled, or swallowed.

D

Know the specific hazards of the fluid you are using.

D

Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,
state, and national guidelines.

D

Always wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid and
solvent manufacturer.

Summary of Contents for 220170













Reviews: