16
START SWITCH
To reduce the risk of serious bodily injury, including
fluid injection; splashing in the eyes; injury from
moving parts or electric shock, always follow the
Pressure Relief Procedure W arning on page 11
before continuing.
WARNING
1
Be sure the sprayer is unplugged.
2
Remove the cover on the voltage change box.
See
Fig 19. Disconnect the terminals, taking note of their
locations. Remove the two screws holding the start
switch, and remove the start switch.
3
Reassemble in the reverse order. To verify the wiring,
refer to Fig 3, page 5.
CAPACITOR
To reduce the risk of serious bodily injury, including
fluid injection; splashing in the eyes; injury from
moving parts or electric shock, always follow the
Pressure Relief Procedure W arning on page 11
before continuing.
WARNING
1
Remove the two screws and the cover of capacitor
(23d).
See Fig 19.
2
Remove the flag connectors from the old capacitor .
Connect the flag connectors of the new capacitor and
replace the cover.
NOTE: The replacement capacitor includes a new resis-
tor, installed.
Fig 7–19
23d
VOLTAGE CHANGE
BOX LOCATED ON
THIS SIDE OF
MOTOR
LOCATED UNDER
THIS COVER
0120
Summary of Contents for 220-834
Page 18: ...18 NOTES...
