Installation
Reverse-A-Clean IV and SwitchTip
WARNING
Failure to install or use the RAC IV tip guard assembly
correctly may result in an undirected spray of paint
into the eyes or on the skin of the operator. Be sure
you:
Use the appropriate gasket for the solvent used.
See page 8.
Fully insert the SwitchTip into the guard.
Fully tighten the guard onto the gun nozzle
using a wrench.
Turn the SwitchTip handle so it is parallel to the
gun nozzle. See Fig. 2.
When replacing a worn spray tip, always install
a new gasket and seat.
RETAINING
NUT
Fig 2
SwitchTip
HANDLE
RAC IV DripLess
TIP GUARD
FULL SPRAY POSITION
FULL CLEAN POSITION
YES
YES
NO
