Graco 220-730, Instructions-Parts List Manual

Page: 12 / 16

Available Tips
NOTE: Shaded part numbers are the most commonly
used contractor tip sizes.
The SwitchTip part number is marked on the handle.
For example, consider part no. 221–327. Important tip
information is contained in the last three digits. A size
327 tip has a 6–8 in. fan pattern width and a 0.027 in.
equivalent diameter orifice. To determine this informa-
tion:
Double the first digit (3) and add 2 to give the approxi-
mate fan pattern width:
3 x 2 = 6
6 + 2 = 8
6–8 in. fan pattern
Convert the next two digits (27) to a measurement in
thousandths of an inch by adding 0.0:
0.027 in. orifice
Remembering how to translate the tip size enables you
to quickly select the right tip for your job.
ORIFICE
SIZE PART NUMBERS ACCORDING TO FAN WIDTH AT 12” (in inches)
(in inches) 4–6 6–8 8–10 10–12 12–14 14–16 16–18 16–18
0.005
0.009 221–405 221–609
0.011
0.013 221–211
221–213 221–311
221–313 221–411
221–413 221–511
221–513 221–611
221–613
0.015
0.017 221–215
221–217 221–315
221–317 221–415
221–417 221–515
221–517 221–615
221–617
221–817
0.019
0.021 221–219 221–319
221–321 221–419
221–421 221–519
221–521 221–619
221–621
221–721
221–819
221–821
0.023
0.025
221–325
221–423
221–425 221–523
221–525 221–623
221–625 221–723
221–725
0.027
0.029 221–327 221–427
221–429 221–527
221–529 221–627
221–629
221–729
221–827
0.031
0.033 221–431 221–531 221–631 221–831
221–833
0.035
0.039 221–435
221–439 221–535 221–635 221–735 221–835 221–935
0.043
0.045 221–443 221–543
0.051
0.055 221–451
221–455 221–551
221–555
221–655
0.063
0.065 221–563
221–665