Graco 208995, Instructions And Parts List

Page: 3 / 30

3 308060
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor.
Do not alter or modify this equipment.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component. Refer to the
Technical Data
on page 29 for the maximum working pressure of this equipment.
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the
Tech-
nical Data
section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
Wear hearing protection when operating this equipment.
Comply with all applicable local, state, and national fire, electrical, and safety regulations.
FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
Ground the equipment. Refer to
Grounding
on page 5.
If there is any static sparking or you feel an electric shock while using this equipment,
stop spray-
ing immediately.
Do not use the equipment until you identify and correct the problem.
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being sprayed.
Consult the electric motor manufacturer for the proper heater-breaker requirements.
MOVING PARTS HAZARD
Moving parts in the pump housing can pinch or amputate your fingers.
Keep clear of all moving parts when starting or operating the pump.
Keep all tools, etc. away from the moving parts to reduce the risk of accidentally catching and
breaking them.
Before servicing the equipment, shut off the electric power,
relieve the pressure
, and drain the
pump by opening the drain valve at the pump base.
HOT SURFACE HAZARD
The pump housing and pump shaft couplers become hot during operation. To reduce the risk of
burning yourself, do not touch them until they have cooled.