WARNING
WARNING
WARNING
EQUIPMENT
EQUIPMENT
EQUIPMENT MISUSE
MISUSE
MISUSE HAZARD
HAZARD
HAZARD
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated
system component. See Technical
Technical
Technical Specifications
Specifications
Specifications in all equipment manuals.
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical
Technical
Technical
Specifications
Specifications
Specifications in all equipment manuals. Read fluid and solvent manufacturer’s warnings.
For complete information about your material, request a Safety Data Sheet (SDS) from
your distributor or retailer.
• Do not leave the work area while equipment is energized or under pressure.
• Turn off all equipment and follow the Pressure
Pressure
Pressure Relief
Relief
Relief Procedure
Procedure
Procedure when equipment is not in use.
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer’s replacement parts only.
• Do not alter or modify equipment. Alterations or modifications may void agency approvals
and create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from the work area.
• Comply with all applicable safety regulations.
• Do not lift pressurized equipment.
PRESSURIZED
PRESSURIZED
PRESSURIZED ALUMINUM
ALUMINUM
ALUMINUM PARTS
PARTS
PARTS HAZARD
HAZARD
HAZARD
Use of fluids that are incompatible with aluminum in pressurized equipment can cause serious
chemical reaction and equipment rupture. Failure to follow this warning can result in death,
serious injury, or property damage.
• Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon
solvents or fluids containing such solvents.
• Do not use chlorine bleach.
• Many other fluids may contain chemicals that can react with aluminum. Contact your material
supplier for compatibility.
4
3A6103A
