Forward/Reverse Cable Replacement
36
3A3394E Repair - Parts
Installation
1. Install new cable (148) by following same route as
old cable is being removed.
2. At ground drive pump bracket (62), install cable
(148) in bracket slot and tighten two nuts. Install ball
joint (40) onto cable and attach ball joint (40) to
ground drive pump with locknut (3).
3. Install cable (148) into handlebar bracket and
tighten two nuts. Install ball joint (40) onto cable.
Install ball joint into handlebar forward/reverse lever
and tighten locknut (3).
4. Verify that the handlebar forward/reverse lever does
not touch handlebar grips. Adjust cable and ball
joints if needed.
5. Install belt cover and tighten four screws.
6. Install front shield onto unit and tighten the six
screws.
7. Install tanks onto unit.
8. Install siphon tubes and tank lids.
9. If equipped with a Pressurized Bead System, install
pressurized bead tanks and compressor. See Pres-
surized Bead System manual 332230.
ti19700a
62
40
3
148
ti23942a
148
3
40
