M0302
7
EN
F
MODES OF OPERATION
FOREWORD
The main feature of these nozzles is that they are easy to
use.
Two operating modes are available:
1
ASSISTED MODE
Dispense by operating the nozzle lever. To interrupt dis-
pensing manually, release the lever.
2
AUTOMATIC MODE
Use the opening lever lock device for automatic dispens-
ing.
To continue dispensing after automatic stop, the lever
must be fully released before proceeding to operate it
again.
To interrupt dispensing in manual mode, press the lever
again, thereby releasing the device, and then release.
NOTICE
Do not use the nozzle outside the parameters indi-
cated on the ”technical specifications” chart
NOTE
Dispensing is automatically interrupted
due
to the
shut-off device, which operates when the level of the
liquid reaches the end of the spout.
G
PREVENTION MISFILLING (optional)
PREMISE
Refuelling with the nozzle equipped with “magnet switch”
is only possible in combination with the “magnet adapter”
, so misfuelling into tanks is made impossible
OPERATION
The “magnet switch” is a fixed magnetic field within the
filler necks of the nozzle. This opens the magnet switch in
the spout, so it is only possible to dispense from the tank
where the magnet adaptor is installed.
NOTICE
Nozzles equipped with “magnet switch” work only in
combination with the “magnet adapter”. The “mag-
net adapter” is an optional to be bought separately.
PART NUMBER
DESCRIPTION
PICTURE
127652
Magnet switch misfil spout
127654
Magnet adapter misfil
adapter (installs into DN40
filler necks only
