3
Instructions for installing SureStitch on Dual Track Frames
Step 2-1:
Secure the Display Console to your quilting frame with the included velcro strap. Place
the Display Console so that the controls will be easily accessible while you are quilting.
(
NOTE:
Do not attach all the wires until after Step 5.)
Step 2 - Display Console Attachment
Step 2
Step 3
Step 4
Step 5
Fig. 2-1
Step 1 - Encoder Assembly
Step 1-2:
Attach the Steel Dual Track Bracket to
each Encoder by sliding the post with the Spring into
the hole on the Bracket (see Fig. 1-2). Insert the
Screws and Plastic Washers removed in Step 1-1.
Step 1-1:
For each Encoder Assembly remove
the pre-assembled Plastic Bracket in order to
attach the Steel Dual Track Bracket. This is
done by first removing the Nut at the bottom of
the Encoder and removing the Steel Washers,
Spacer and Bolt once the Nut is removed (see
Fig. A-1). Then remove the Screws and Plastic
Washers on the back of the Encoder (they will
be used in the nest step).
Be careful not to lose your springs.
Fig. 1-2
Fig. 1-1
Plastic
Washers
Screws
Bolt
Plastic
Bracket
Spacer Steel
Washers
Encoder
Nut
Steel Dual
Track Bracket
Spring
Encoder
Screws
Plastic
Washers
