GRACE ONE 2013 Manual
67
Disassembling the rear wheel
1.
Remove the both central M4 x25 Allen screws
on the motor plug.
2.
Remove the plug from the motor controller
and open the cable straps from left chain stay.
3.
Loose both wheel nuts with 19mm box
wrench.
4.
Remove the locking ring placed below the wheel nuts.
5.
Pull out the rear wheel downwards.
Switch the chain onto the smallest sprocket of the sprocket set and note how
the chain runs the rear wheel.
When the wheel has been disassembled, insert the brake pad retainer
between the brake pads in order to avoid unintentionally adjusting the
distance between them.
6. For reassembly, follow the steps for disassembly of the rear wheel in reverse order and
make sure that the chain is in the same position on the cartridge as was the case before
the wheel was disassembled. Also take care for the proper fixing of the motor cable.
The drive chain:
The chain should always be metallically clean and have a sufficient coating of lubricant.
If the chain is dry (without lubrication) or dirty, clean
it with a clean or slightly oily cloth and then coat it
with a bicycle chain oil that is commercially available
and leave it overnight.
Remove any excess oil the following day with a cloth.
Summary of Contents for ONE
Page 41: ...GRACE ONE 2013 Manual 83 Notices ...
Page 42: ...84 GRACE ONE 2013 Manual ...
