page 19
5. The Upgrade window will display “Firmware
upgrade finished successfully” once the update
process is complete. If this message does not
appear or the upgrade fails, start the update
process over.
6. Once the upgrade is successful, click Exit to close
the application.
7. With the PC still powered on and the m920 still
connected via USB to the PC, turn the m920
off and then back on. Upon powering back up,
the m920 will display “UF” on the 7-segment
display to indicate that it is Updating Firmware.
Do not interrupt the unit or disconnect the
USB during this sequence. The update process
may take a few minutes. Once completed, the
new firmware version will be displayed on the
7-segments. At this time, power cycle the m920
to return to normal operation.
Should an error occur during the update process, an
error code will be displayed instead of the firmware
version. All error codes start with “E”. If this happens,
restart the update process. If the problem persists,
please contact our service department at 1-303-823-
8100 x 105.
