Grace EASY User Manual Download

Page: 5 / 63

GRACE EASY Manual

Page | 71

Explanations of symbols

To begin with, we would like to acquaint you with the meaning of the attention and hazard

symbols which you can find in these operating instructions.

It is very important that you follow the information by the symbols.

Caution!

This caution symbol points out a potentially hazardous situation through which

persons in the environment may sustain injury, or the product or objects may be

damaged.

Danger!

Denotes an immediate danger through explosion, for instance by improper handling

of the battery and charger.

Information!

This sign has useful information about how to handle your product.

Note!

This symbol points out that damage is possible on the vehicle.

Read the original operating manual!

This symbol refers to important information in the original operating instructions of

the component manufacturers.

Summary of Contents for EASY
































































Search results

Summary of Contents for EASY

Reviews:

Related manuals for EASY

Brands by name

Popular brands

Grace EASY, User Manual

Search results

Summary of Contents for EASY

Reviews:

Related manuals for EASY

Brands by name

Popular brands