Grace Cutie Assembly & Use Download Page 56

Page: 56 / 58

Cutie Frame

1. Turn the encoder

lock collar

to point up. Then tighten the

lock collar screw

with the 2.5 mm

Allen wrench.

The lower encoder is plugged into the lower encoder port on the quilting machine or in the

SureStitch control box. See those product manuals for details.

Upper Encoder Installation

• Which setup are you using?

• If you are using a quilting machine that your encoders came with, please see your machine

manual for instructions on installing the upper encoder.

• If you are using the Cutie frame top plate and a domestic sewing machine, the encoder is

installed onto your top plate.

Install the upper encoder directly onto the top plate encoder bracket so the dark

encoder

wheel

is to the front of the bracket. Tighten with the 4 mm Allen wrench.

Encoder

Wheel

Accessories - Encoder Installation

Summary of Contents for Cutie



























































Search results

Summary of Contents for Cutie

Reviews:

Related manuals for Cutie

Brands by name

Popular brands

Grace Cutie, Assembly & Use

Search results

Summary of Contents for Cutie

Reviews:

Related manuals for Cutie

Brands by name

Popular brands