background image

Grace Industries, Inc.

WorkForce®2

Model WF2 

User’s Information

WorkForce WF2 UI 2020-02

Micro B USB Connection 

for Confi guration 

and Battery Charging 

WorkForce® model WF2

 is a worker-worn 

motion-sensing Man-Down Alarm that uses 
proprietary, ISM license free, high performance 
RF (radio-frequency) wireless signaling to help 
protect workers in dangerous and hazardous 
environments. 

WorkForce® provides real-time 

motion-

sensing, 

including 

fall-detection

, and contains 

an Emergency Alarm Button  to immediately 
transmit a distress alarm signal. 

WorkForce® Alarm Monitoring (AM) version 
also receives distress alarm signals from other 
workers equipped with WorkForce® and alerts 
the user with audible and visual indicators. 
Other emergency signaling features of Work-
Force® include Evacuate, PAR, Roll-Call and 
optional Out-of-Range indication. 

A complete worker safety system can be 
achieved by using additional Grace monitoring 
products with locating capabilities.

Antenna

Bright

OLED Screen

Piezo

Sounder

Menu 

Hotkeys



#

Select Button

Menu Button 

Top LED Indicators (4)

System Status 

Indicators

(4 Side LEDs)

Rear View 

with Grip Clip

for attachment

Emergency 

Alarm Button

Rear View 

with optional 

Swivel Clip

for attachment

Satellite LED Icon 

 

Indicates GPS Model

Summary of Contents for WorkForce 2













Reviews: