Page 5
S5T5DLC-1 UI 1119
10. Once download is complete, your log will be displayed in a table as shown below. The events will be
indexed from #1 (as the most recent) to the oldest event.
A. Each event will have a timestamp of when the event occurred.
1. Note: the unit has an internal clock which is used to track time and log events, this is set from
the factory but runs off of the PASS units batteries. If the PASS’s batteries go dead or are
removed for more than 30 Minutes, the clock will lose its time reference and revert back to a
default time of 04/05/2063).
2. If using Grace Watch/In Command software with TPASS
®
5 or upgraded SuperPASS
®
5X, you
can confi gure it to sync/update the clock automatically while connected to Grace Watch/In
Command. If not using Grace Watch/In Command for this command, then the PASS unit’s
Clock must be manually set as instructed in
Appendix B Setting the Clock.
11. The Event column displays a text based description of the logged event and color codes it based on
its event type. See
Appendix A
for list of common events and their description.
A. Red: Alarms.
B. Yellow: Warnings.
C. Blue: System info (clock and setup data).
D. White, Purple, and others: Additional system data.
