17
OTTOVAC | Operator’s manual
l
Make sure you are trained before using the equipment.
l
Get help when needed. When lifting awkward or heavy loads, utilize a two person lift.
Make sure you lift at the same time and keep the load level.
l
Wear proper required protective shoes and gloves.
!
Use this basic lifting technique for small objects when you can straddle the
load and use a wide stance.
1.
Get as close to the object as possible.
2.
Use a wide stance with one foot forward and to the side of the object for good
balance.
3.
Keep your back straight, push your buttocks out. Use your legs and hips to
lower yourself down to the object.
4.
Move the object as close to you as possible.
5.
Put your hand (same side of your body as the forward foot) on the side of the
object farthest from you.
6.
When lifting the load holding the OTTOVAC with one hand, secure the load
with your other hand.
7.
Prepare for lifting, tighten your core muscles, look forward and upward, and
maintain a straight and strong back.
!
Do not hold your breath while lifting. Do not bend or twist your waist. Do not
use a partial grip (1-2 fingers). Do not obstruct your vision when carrying. Do
not jerk or lift quickly. Do not pinch your fingers or toes.
8.
Lift slowly and follow with your head and shoulders. Hold the load close to
your body. Lift by extending your legs with your back straight, and breathe out
as you lift. Pivot your feet to avoid twisting.
OPERATING THE OTTOVAC
1.
Position the OTTOVAC firmly against the surface of the object you want to lift.
2.
Press the power ON/OFF button
Ⓑ
to turn on the motor and create a seal on the
surface of the item you want to lift. The indicator light
Ⓖ
will flash green when the
motor is running. The seal will be created within seconds.
3.
When the sensor detects that maximum pressure is reached, the pump will
automatically turn off. For the automatic pump to work, make sure the motor is
turned on (the indicator light is solid green) when lifting any objects.
