Grabo NGH-V2, Manual

Page: 23 / 36

b) Do not lift objects weighing more than 75 kg (165 lbs).
There is a risk the weight can fall off.
c) Risk of load crushing feet and hands and damaging the
object and tool. Do not shake the tool while lifting, moving
and placing objects. Do not swing or shake the load while
lifting, moving and placing objects. Do not use the tool when
the seal is worn out. Lift and carry the load with uniform
speed without sudden sharp and strong movements.
d) Do not use the tool while the battery is low. There is a risk
of injury and damage to the materials being lifted.
e) If the sealing force begins to noticeably decrease while the
battery is fully charged, check the foam seal for wear and tear
or damage. Do not attempt to lift anything with the tool until
you have replaced the seal.
f) Use caution when lifting large thin flexible sheets, like
drywall, cardboard, plastic, plywood, thin sheet metal etc.
Thin sheets bend and flex and can unexpectedly change
curvature above their limit and detach.
g) Do not attach the tool to surfaces with visible puddles of
water. Internal components are not waterproof. If water is
sucked into the air ducts it can cause permanent damage to
the tool. The GRABO® H V2 is not waterproof and therefore
extreme caution should be taken when using in the rain or
wet
19