The battery begins charging as soon as it is connected to the
charger, and stops charging as soon as it is full.
Operating the GRABO Pro
1.
Slide the power switch to the left, to the ON position, to
power on the GRABO Pro. The digital vacuum gauge display
lights up to show you the battery charge level in the battery
status icon. It is advisable to fully charge the battery before
using the GRABO Pro.
Caution: Using the GRABO Pro while the battery is
low may result in injury and damage to the
materials being lifted.
2.
Position the GRABO Pro flush against the surface of the item
you want to lift.
3.
When the power indicator switches from green to red, the
vacuum gauge and the GRABO Pro is in ready mode.
4.
Press the green button to turn on the vacuum pump and create
a seal to the surface of the item you want to lift. The seal is
created within a second.
5.
When the vacuum pump reaches the maximum level, the
motor will stop automatically. The GRABO Pro is engaged and
you can lift the material.
8
