33
http://www.GMCmap.com/log.asp?id=UserAcGeigerCoCPM+ACPM+uSV
At least one reading data has to be submitted.
Here: 1. UserAccountID: user account ID. This ID is assigned once a user registration is completed.
2. GeigerCounterID: a global unique ID for each registered Geiger Counter. 3. CPM: Count Per
Minute reading from this Geiger Counter . 4. ACPM: Average Count Per Minute reading from this
Geiger Counter(optional). 5. uSv: uSv/h reading from this Geiger Counter(optional).
Followings are valid data submission examples:
1. http://www.GMCmap.com/log.asp?id=15+13.2+0.075
2. http://www.GMCmap.com/log.asp?id=15+13.2+0
3. http://www.GMCmap.com/log.asp?id=15+0+0
4. http://www.GMCmap.com/log.asp?id=0+13.2+0
5. http://www.GMCmap.com/log.asp?id=0+0+0.075
The result will be returned immediately.
The following are the returned result examples:
1. OK.
2. Error! User is not found.
3. Error! Geiger Counter is not found.
4. Warning! The Geiger Counter location changed, please confirm the location.
If a location change warning received, the user need to confirm the location from that Geiger
Counter profile. OR Create another Geiger Counter from your account. In this case, you can have
two locations share one Geiger Counter.
Applications
Stationary Application
The unit has two holes on its back for hanging the unit on the wall for stationary monitoring of
radiation and long term surveillance applications. With the wall adapter, it is able to monitor the
data continuously, 24/7.
Mobile Application
To use the unit n the car while driving, use a car USB power adapter to charge/power the unit.
Position the unit where it can easily detect radiation, i.e. on the dashboard or similar locations in the
car. You may need to fix the unit to an appropriate location for safety reasons.
