26
Use S2 and S3 to adjust the contrast level. The contrast level will be saved and it will be used when
the unit is ON.
Timed Count
The Timed Count can be started with a schedule OR without a schedule.
When it started with a schedule, the Timed Count will be started after a scheduled time period passed.
This is useful if a testing target is not ready immediately.
When it started without a schedule, the Timed Count will be started immediately once the timed
count period is set.
The Timed Count can be set from the menu:
Set a schedule
This example shows the schedule is set to 2 minute.
Navigation keys:
S1: Back/Exit
S2: Increase the cursor position value
S3: Decrease the position value.
S4: Move the cursor to input data type between Day, Hour, Minute and Second.
Set Timed Count Duration
There are 5 preset durations from menu: 1 minutes, 10 minutes, 100 minutes, 12 Hours and 24 Hours.
If the duration is not listed, then you can set a new duration (1 second to 256 days) from menu Other
duration:
