After you entered a valid IMEI:
Click on the link to see the data. You can also use this link on a smartphone or tablet, if you do the installation in the vehicle!
Installation is only complete if the following mandatory test results are accomplished successfully:
TS (Timestamp):
Current data
is shown (check ts coloum for the timing, be aware of time zone differences, it uses
Lat / Lon /Alt (GPS Position):
the gps position and altitude is shown
, you could check the values by entering them in
Google Maps.
Speed: when driving speed is higher than 0.
Dig In 1 (Digital Input 1) must be 1if ignition is ON
(only if ignition signal is connected to digital input 1)
Dig In 1 (Digital Input 1) must be 0 if ignition is OFF
(only if ignition signal is connected to digital input 1)
Certain accessories are also shown
Drivercode: if an iButton is connected to the reader, there will be
1.3
SIM Cards (usually already in the device)
Refer to your vendor for SIM card related issues. It could be that the SIM card is already activated and inserted in the tracking
device. The right SIM cards must be available for starting installation. The partner / customer is responsible for acquiring the
right SIM card. The SIM card must fulfill special requirements (refer to UserManual). The tracking units only work with the SIM
card and operator that has been configured on the tracking unit (GSM operator, country). SIM card should be inserted in the
module while the connector is plugged off (while module has no power).
Summary of Contents for CT07
Page 1: ...CT07 INSTALLATION MANUAL CT07 VERSION 3 3...
Page 2: ......
