GPO Westwood, User Manual

Page: 6 / 60

6
Input and Output
AUX-IN R+L
A
AUX-IN
B
DC-IN
C
C
B
A
To use your GPO Westwood Speaker with auxiliary (aux) – in
connection, please follow the instructions below:
• Turn your GPO Westwood speaker on using the above
instructions.
• Connect the aux cable provided to your speaker by inserting the
red jack into the red port and the white jack into the white port.
Connect the 3.5mm jack plug into the device of your choice
(smartphone, tablet, MP3 player).
• Press the function button once. It will take the speaker
approximately 2 seconds to switch to AUX mode, the red light
underneath AUX will light up.
• Press play on your device and control your music from there.
Just like in Bluetooth mode, you can control the volume from
your device and your speaker. Turn the bass and treble dials to
achieve the sound you desire.
• To disconnect the device, simply turn off the unit using the
instructions provided above, and then disconnect the cables
from your device and speaker.
• We do not advise that you leave any cable connected to the
speaker or to your music device when not in use.
Operation Instructions: AUX Mode