GPO DARCY, User Manual

Page: 11 / 68

11
TO SET THE ALARM
In Standby mode:
1. Press and hold the ALARM button to trigger alarm set mode then
AL1 or AL2 will begin to flash.
2. Press the S/- button to scroll to <AL1>. Press and release
the ALARM button.
3. The Alarm 1 hour will begin to flash then press the S/-
button to adjust and press ALARM button to confirm.
4. Press the S/- button to scroll to the hour for the alarm and
press and release the ALARM button .
5. The minutes will now flash. Press the S/- button to scroll to
the minutes for the alarm and press and release the ALARM button.
6. Press the S/- button to scroll to the sound source for the
alarm. You can choose from Buzzer, FM & AM . Press and release
the ALARM button
7. Press the S/- button to choose Alarm On and press and
release the ALARM button to confirm.
8. AL1 symbol in the left of the radio display will confirm that an alarm
has been set.
Note
: The radio will then prompt you to set the time. An alarm can only
be set after the time has been set.
Note : Alarm 2 setting is same as Alarm 1.
Stop the Alarm
- When the alarm sounds, press and release the Standby button.
- Note: If you press the STANDBY BUTTON to stop the alarm, the
alarm symbol will remain in the display and the alarm will sound again
at the same time the next day.
- Turn off the Alarm