$WODV$UP
&KDVVLV
Gimbal Post:
The Gimbal post rides on a bearing, reducing the friction between the arm and the post. The
Gimbal Post Clamp can be adjusted with a 5/32 Allen wrench for the desired drag.
Reversing the Socket Block Adapter Assembly:
Using the two supplied arm wrenches (located in the lid pocket of the arm case), remove one of the
two vertical pin caps holding the Socket Block Adapter Assembly on to the arm. Remove the
vertical pin and flip the Socket Block Adapter Assembly over. Reinstall the vertical pin and cap
ensuring that both caps are tightened firmly.
Maintenance:
To clean the arm, remove all canisters, rinse the chassis with water, dry then reinstall the
canisters.
Periodically check the tightness of the six (6) vertical pin caps
and
the eight (8)
horizontal pin caps.
Spare Parts Inventory (sent with each arm):
1 x Canister pins
1 x Horizontal pin cap
1 x Vertical pin cap
1 x Socket Block pin spacer washer
1 x Socket Block pin retaining ring
10 x Horizontal travel bumper