%$77(5<&21),*85$7,21
FIGURE 18:
7+5((%$77(5<&21),*85$7,21-803(5%/2&.
Battery
Legend:
A - Auxiliary
C - Camera Battery
M - Monitor Battery
Three Batteries:
This is the "standard" configuration of the PRO™ Sled. It should be used with 24-volt camera
systems where a separate monitor battery is desired. In this configuration:
1. The
IURQWEDWWHU\
(M) supplies 12 volts to the monitor and all video related accessories.
2. The
UHDUORZHUEDWWHU\
(C) supplies 12 volts to the three camera jacks on the upper J-box.
3. The
UHDUXSSHUEDWWHU\
(A) is able to:
a) in conjunction with the rear lower battery supply 24 volts to separate pins on the
same three jacks
RU
b) supply 12 volts to the Aux. jack on the upper J-Box.
FIGURE 19:
7:2%$77(5<&21),*85$7,21-803(5%/2&.6
Two Batteries:
a. These two configurations can be used for 12 or 24-volt camera systems but since there is no
separate battery for the monitor in either case, video noise may be present. In both of these
configurations, the
UHDUORZHUEDWWHU\
(C/M) serves as a 12-volt supply to the three camera
jacks on the upper J-box, as well as to the monitor and all video accessories. By use of the
12/24-volt switch, the second battery (A) can be placed in series with the
UHDUORZHUEDWWHU\
(C/M) to supply 24 volts to the three camera jacks on the upper J-box,
RU
separated to supply
12-volts to the Aux. jack on the upper J-Box. The choice between the two configurations is
driven by and dependent upon the balance and inertia requirements of the operator, and the
configuration of the other masses on the sled.
b. In situations where only one battery is required the Auxiliary battery (A) in either of
the Two Battery configurations can be removed. This configuration will leave the
UHDUORZHUEDWWHU\
(C/M) to supply 12-volts to the camera, monitor and all video
accessories.