GPI MR 5-30 Owner'S Manual Download Page 1

General Information ������������������ 2
Safety Instructions �������������������� 2
Installation �������������������������������� 2
Operation ���������������������������������� 3
Calibration �������������������������������� 4
Maintenance ����������������������������� 4
Troubleshooting ������������������������ 5

Specifications

 ��������������������������� 5

Illustrated Parts List ������������������ 6
Parts and Service ��������������������� 7

TABLE OF CONTENTS

5252 East 36th Street North
Wichita, KS USA  67220-3205
TEL: 316-686-7361
FAX: 316-686-6746

SAVE THESE INSTRUCTIONS

MR 5-30 Aviation Fuel Meter
Owner’s Manual

To the owner…

Congratulations on receiving your GPI 
MR 5-30 Meter� We are pleased to provide 
you with a meter designed to give you 

maximum reliability and efficiency.

Our business is the design manufacture, 
and marketing of liquid handling, 
agricultural, and recreational products� We 
succeed because we provide customers 
with innovative, reliable, safe, timely, and 
competitively-priced products� We pride 
ourselves in conducting our business with 
integrity and professionalism�

We are proud to provide you with a quality 
product and the support you need to 
obtain years of safe, dependable service�

President

Great Plains Industries, Inc

10/11

Rev� -  922092-09

Summary of Contents for MR 5-30









Reviews: