GPI M30-G8N Product Owners Manual Download Page 2

Please save these instructions for future reference. Read carefully before attempting 
to assemble, install, operate or maintain the product described.

Protect yourself and others by observing all safety information. Failure to comply 
with instructions could result in personal injury and/or property damage.

Please refer to back cover for information regarding this product’s warranty and 
other important information.

Thank you for choosing a Great Plains Industries product, and 

congratulations on your purchase!

Headquartered in the heartland of the U.S., GPI strives 

for integrity, innovation, continuous improvement, and 

dependability—values you will immediately recognize when using 

our products. 

The maintenance policies and procedures outlined in this manual 

emphasize our commitment to safety and our dedication to you 

as a customer. By working together, we can ensure years of 

reliable, quality service.

SAVE FOR YOUR RECORDS

Model #:  ___________________

Serial #:  ___________________

Purch. Date:  _______________

DO NOT RETURN THIS PRODUCT TO THE STORE!

Please contact Great Plains Industries, Inc.

 

before returning any product. If you are 

missing parts, or experience problems with your installation, contact our Customer 
Support Department. We will be happy to assist you.

Call: 800-835-0113 or 316-686-7361

Email: 

[email protected]

Summary of Contents for M30-G8N

















Reviews: