GPI M30-G8N Product Owners Manual Download Page 16

© 2019 Great Plains Industries, Inc., All Rights Reserved.

Great Plains Industries, Inc. / 800-835-0113 / GPI.net

921529-01 Rev A

6/2019

GPI® FOUR-YEAR LIMITED WARRANTY

Great Plains Industries, Inc. 5252 E. 36th Street North, Wichita, KS USA 67220-3205, 

hereby provides a limited warranty against defects in material and workmanship on all 

products manufactured by Great Plains Industries, Inc. This product includes a 4 year 

warranty from date of purchase as evidenced by the original sales receipt. A 54 month 

warranty from product date of manufacture will apply in cases where the original sales 

receipt is not available. Reference product labeling for the warranty expiration date based 

on 54 months from date of manufacture. Manufacturer’s sole obligation under the foregoing 

warranties will be limited to either, at manufacturer’s option, replacing or repairing defective 

goods (subject to limitations hereinafter provided) or refunding the purchase price for 

such goods theretofore paid by the buyer, and buyer’s exclusive remedy for breach of any 

such warranties will be enforcement of such obligations of manufacturer. The warranty 

shall extend to the purchaser of this product and to any person to whom such product is 

transferred during the warranty period. This warranty shall not apply if:

A. the product has been altered or modified outside the warrantor’s duly appointed 

representative;

B. the product has been subjected to neglect, misuse, abuse or damage or has been 

installed or operated other than in accordance with the manufacturer’s operating 

instructions.

To make a claim against this warranty, contact the GPI Customer Service Department at 

316-686-7361 or 800-835-0113.
Or by mail at:
Great Plains Industries, Inc.
5252 E. 36th St. North
Wichita, KS, USA 67220-3205

The company will guide you through a product troubleshooting process to determine 

appropriate corrective actions.
GREAT PLAINS INDUSTRIES, INC., EXCLUDES LIABILITY UNDER THIS WARRANTY 

FOR DIRECT, INDIRECT, INCIDENTAL AND CONSEQUENTIAL DAMAGES INCURRED 

IN THE USE OR LOSS OF USE OF THE PRODUCT WARRANTED HEREUNDER.
The company herewith expressly disclaims any warranty of merchantability or fitness for 

any particular purpose other than for which it was designed.
This warranty gives you specific rights and you may also have  

other rights which vary from U.S. state to U.S. state.
Note: In compliance with MAGNUSON-MOSS CONSUMER WARRANTY ACT –  

Part 702 (governs the resale availability of the warranty terms).

Summary of Contents for M30-G8N

















Reviews: