background image

1

TABLE OF CONTENTS

General Information ..................................................... 2
Safety Instructions ....................................................... 2
Installation ................................................................... 2
Operation ..................................................................... 4
Maintenance ................................................................ 4
Repair .......................................................................... 4
Troubleshooting ........................................................... 5
Illustrated Parts List ..................................................... 6
Specifications .............................................................. 7

Great Plains Industries, Inc. is a member of

the Petroleum Equipment Institute.

SAVE THESE INSTRUCTIONS

10/12

To the owner...

Congratulations on receiving your GPI Fuel Pump. We 

are pleased to provide you with a system designed to 

give you maximum reliability and efficiency.

Your fuel pump is designed for use with aviation gasoline 

(AVGAS  100LL)  and  kerosene  grade  (JET A).  Please 

take all due precautions when handling these flammable 

liquids. Your safety is important to us. 

Also,  to  assure  the  longest  possible  service  life,  it  is 

important that you follow the operation and maintenance 

procedures  outlined  in  this  manual.  We  are  proud  to 

provide  you  with  a    quality    product    and    dedicated  

support. Together with your conscientious use, we are 

sure that you will obtain years of safe, dependable service.

President

Great Plains Industries, Inc.

M-3130-AV

115-/230-Volt Fuel Pump

Owner’s Manual

Summary of Contents for M-3130-AV








Reviews: