background image

Rev. -   922124-01

7

PARTS AND SERVICE

In order to preserve the UL Listing for the motor, do not attempt to 

service the motor. For products serviced outside the factory, the UL 

nameplate must be defaced to indicate that the equipment may no 

longer meet the requirements for UL Listing. This does not apply 

to products serviced outside the factory under the UL program for 

Rebuilt Motors for Use in Hazardous Locations.
For warranty consideration, parts, or other service information, 

please contact your local distributor. If you need further assistance, 

contact the GPI Customer Service Department in Wichita, Kansas, 

during normal business hours.
A toll free number is provided for your convenience.

1-800-835-0113

To obtain prompt, efficient service, always be prepared with the 

following information:
1.  The model number of your pump.
2.  The serial number or manufacturing date code of your pump.
3.  Part descriptions and numbers.
Part information can be obtained from the Illustrated Parts List.
For warranty work, always be prepared with your original sales slip 

or other evidence of purchase date.
Please contact GPI before returning any parts. It may be possible 

to diagnose the trouble and identify needed parts in a telephone 

call. GPI can also inform you of any special requirements you will 

need to follow for shipping fuel dispensing equipment.

Do not return the pump or parts without authority from the 

Customer Service Department. Due to strict government regu-

lations, GPI cannot accept parts unless they have been drained 

and cleaned.

 CAUTION

SAVE THESE INSTRUCTIONS

Summary of Contents for M-150S-EM









Reviews: