16
ENTER
REMARKS
DISPLAY
PRESS
STEP
6
SETTING
THE
RELAYS
pre b
factor
count
rate
loc
relay
tot
or
preuu
b##.##
PRE A
Followed by
last PRE A
entered
PRE B
SETTING
THE
PRESETS
This section sets up the relay information.
Press the PRGM key to choose
tot
(Relay B
assigned to total) or PREW (Relay B assigned
to prewarn). Press enter when the desired
choice is displayed.
This will only appear if
tot
selected. This is
the duration (.01 to 99.99 sec) that relay B
will remain energized. If 00.00 is selected, the
relay will latch until reset.
PRE A = Preset A (Batch Amount); The set
point at which output A will drop out after
started. If the displayed value is not the de-
sired preset, press the keyunder the digit(s)
to be changed.
PRE B = Preset B ;
a)
Tot
selected
The set point at which
output B will energize.
b)
preuu
selected The number of counts
before batch ends that
output B will drop out.
If the displayed value is not the desired
preset, press the key under the digit(s) to be
changed.
PROGRAMMING
(continued)
PRGM
PRGM
PRGM
PRGM
PRGM
PRGM
ENTER
PRE A
PRGM